Metal roofing is a much better overall investment — it is longer lasting, durable and more weather-resistant (no warping, cracking, or peeling). It does not burn and is impervious to termites and pests. In testing, metal systems have withstood winds up to 200 m.p.h. and have historically survived hurricanes and wind storms when other materials have failed. In addition, metal roofing is energy efficient and recyclable. 

The noise generated by a metal roof that is properly installed over a roof deck and insulation is no greater than that of a shingle system. 

There are colors and profiles available that blend in with existing environments. The local building codes and neighborhood by-laws should be addressed when considering metal roofing. Contact Allsteel for more information.

A quality metal roof that is properly installed could last the lifetime of the owner. In fact, because metal withstands so many elements, metal roofing is known for its extensive life cycle.

Properly installed metal roofing will withstand inclement weather (high winds, hail, snow, and rain) better than any other roofing material. Metal easily sheds snow and ice and does not absorb water which can lead to cracking and rotting in the freeze-thaw cycling in other materials.

With proper installation, the probabilities of a strike to a metal-roofed structure are no more or less than any other kind of structure, as these probabilities have to do with height and size of the structure and its surroundings, rather than its construction materials. 

A properly installed metal roofing system is virtually maintenance-free over the life of the roof.

Steel roofing can weigh half as much as shingles (shingles average 2 to 2.5 lbs. per square foot) and 10% the weight of clay (clay tile weighs 10 lbs. or more per square foot). 

Metal roofing is custom cut to the inch based on individual project measurements and panels can be provided up to 50' in length. Color matching trim and fasteners are available. Consult Allsteel for availability. 

Metal roofing should be applied using clips or screw fasteners (as recommended by the manufacturer). A basic knowledge of sheet metal work is required for trimming panels, cutting valleys, hips and penetrations, fitting of trim and proper application of fasteners. 

Although the initial cost of metal roof systems may be higher than shingles, the cost/benefit ratio over the life of the roof is superior to either shake, slate, or tiles. Material cost alone (retail) for metal ranges from $40 to $250 per square depending on the gauge, configuration and finish. Installed cost ranges from $100 to $600 per square. The material cost of shingles varies from $25 to $100 per square with an installed cost ranging from $50 to $400 per square. Shakes will show an average installed cost of approximately $190 per square and clay/concrete tile and slate systems will usually cost more than shake. These costs vary according to region.